Recommended Tire Covers for 235/80r16 Tires

Question

Question:

What size tire protective covers do I need for 235/80r16 tires.

asked by: Verlyn F

0

Expert Reply:

The 235/80r16 tires are 30.8 inches in diameter and 9.3 inches wide. I recommend the SnapRing TireSavers Tire Covers - 30" to 32" Diameter - White Vinyl - Qty 2 # ST7002WH for storage covers or the Bestop X-Large Tire Cover, 31" x 11" - Black Denim # B6103115 for a spare tire cover.

expert reply by: Jason S

0

Answer 1

Your 235/80R16 tire has a 30.8" diameter so for your application I recommend the Adco Ultra Tyre Gard RV Wheel Covers #290-3972 for tires that are still on the trailer or the Classic Accessories Universal Fit Spare Tire Cover #052963753875 if…

view full answer...

Answer 2

Yes, we carry a black cover for your ST235/80R16 tires. Your tire's diameter is 30.8", so the ADCO #290-3972 covers will work. This product comes with a set of two tire guards, so if you have tandem axles, you'll need to purchase two…

view full answer...

Answer 3

Hey Eric, To keep your ST235/80R16 spare trailer tire protected, I recommend the etrailer 30"-32" Tire Cover #e77VV. Your ST235/80R16 tire measures 30.8 inches, so this cover will be the perfect size to keep it safe and it's super easy…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Recommended Tire Covers for 235/80r16 Tires

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching