Correct Slipper Spring for my 16 ft. Aluminum Jon Boat Trailer
Updated 05/27/2020 | Published 05/22/2020
Question:
I have an old boat trailer with 1.5” dia axle that needs new springs. There are no ID numbers anywhere on the trailer or axle, but the old springs are 4 leaf springs. The trailer is carrying a 16 ft aluminum Jon boat made of 1/8” aluminum. Would these springs be okay to use?
asked by: Matthew
Expert Reply:
Yes as long as the dimensions are the same you will have no issues with using the 4-Leaf Slipper Spring w/ Radius End part # SP-179275. Most bare 16 ft jons come in under 500 lbs. so the capacity will be perfect for you even if you load it down with gear.
I have attached the installation video I made on the springs for you to check out.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Search Results: boat trailer parts
- Search Results: boat trailer leaf spring
- Search Results: trailer leaf springs
- Search Results: leaf springs
- Search Results: trailer suspension parts
- Search Results: slipper spring
- Search Results: slipper springs
- Article: Trailer Wiring Diagrams
- Shop: 2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Shop: 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Shop: 3-Leaf Slipper Spring for 1,500-lb Trailer Axles - 24-1/4" Long - EMCO
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Video: All About the 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles
- Video: Spring-Eye Bolt with Locknut for Slipper Springs: The Breakdown
- Video: Hands-On with the CE Smith Replacement U-Bolt w/ Nuts for 2-3/8" Round Axles
- Video: Feature Breakdown: U-Bolt Plate
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Standard Trailer Light Kit with 25' Wire Harness
- Shop: Trailer Hitch
- Q&A: How Much of a Slipper Spring Should be Sticking Out Past the Rear Hanger
- Q&A: Hole Dimensions on the U-Bolt Plate part # CE20001G
- Q&A: What Replacement Hardware do I Need to Use with My Slipper Springs # # SP-161275?
- Q&A: Are Radius End And Flat End Slipper Springs For A Trailer Interchangeable?
- Q&A: How Far Apart Should the Leaf Spring Hangers Be Spaced With a 26 Inch Long Leaf Spring
- Q&A: Picking Out Trailer Leaf Springs for Trailer with 30 inches between Hangers
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Article: The Basics of Boat Trailer Bunks: Bunks or Rollers?
- Video: Installing the Curt T-Connector Vehicle Wiring Harness on a 2022 Honda HR-V
- Video: Installing the EcoHitch Hidden Trailer Hitch Receiver on a 2022 Honda HR-V