Replacement Hitch Pin for Yakima RidgeBack Bike Rack

Question

Question:

Hello I am trying to find the right replacement hitch pin for my Yakima Ridgeback 5. SKU 8002459 Its a 2 reciever. Not sure if all Yakima hanging hitch racks have the same pin.

asked by: Jeremy F

0

Expert Reply:

Most Yakima hanging racks like your RidgeBack use the same hitch pin. The pin you're looking for is part # 889-0231.

expert reply by: Charles S

0

Answer 1

The Replacement Hitch Pin #889-0231 is 3/8" in diameter.

view full answer...

Answer 2

To replace the threaded hitch pin and lock for your Yakima HoldUp, it will depend on if you have the 2" shank or if you have the 1-1/4" shank with a 2" adapter. For the 2" shank, you will need the Replacement Hitch Bolt and Clip…

view full answer...

Answer 3

Hello Bob, thanks for reaching out. The Replacement ZipStrips #Y8890297 you were looking at will fit the Yakima FullSwing, RidgeBack and SwingDaddy bike racks. I am not quite sure what you mean by "sidewinder cradle for tandem", but as long…

view full answer...

Answer 4

Yes, I checked with Yakima and the Replacement Zip Strips #Y8890297 that you referenced have been confirmed to fit your Yakima Ridgeback Bike Rack part #Y02458.

view full answer...

Answer 5

If you look at the provided diagram, you can see the replacement parts that Yakima offers for your Ridgeback Bike Rack. If what you're needing isn't shown, please let me know what you're needing. Zip strips #Y8890297 Endcap #8890306…

view full answer...

Answer 6

I reached out to my contact at Yakima and the change made to the Ridgeback in November 2015 was most noticeably made to the cradles. The older style cradle had a gray button to release the zip strips and the newer style has a black button for the zip…

view full answer...

Answer 7

That's not good! It sounds like it come unthreaded. To replace it you will need the Replacement Spring Pin for Yakima DoubleDown or DoubleDown Ace Bike Racks item #Y90175. This is the pin that allows the bike rack to tilt down so you can access…

view full answer...

Answer 8

To determine whether you need the (discontinued) 2" Shank Adapter 8890298 (prior to November 2015) or #8880612 (after November 2015) you simply need to measure the holes at the end of the shank which the adapter fits over. If you have an older…

view full answer...

Answer 9

The pin you're looking for for your Yakima Ridgeback is part #889-0231.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Replacement Hitch Pin for Yakima RidgeBack Bike Rack

Featured Help Information

Miscellaneous Media

Continue Researching