Can I Convert Grease Hubs to Oil Hubs on 7,000 lbs EZ Lube Axle?
Updated 05/03/2020 | Published 04/30/2020
Question:
Can you install these on an easy lube axle to convert it to oil bath ?
asked by: Randall
Expert Reply:
Yes, as long as you are installing this on a 7,000 lb axle, you can use these to convert your EZ Lube grease hubs to oil bath hubs. If you aren't sure of your axle size, there should be a tag on the axle with the information or you can just match up your bearing numbers. This hub uses bearings 25580 and 14125.
The spindle doesn't really have anything to do with switching to oil from grease. The important factors are the seal and dust cap on the hub. An oil seal is different from a grease seal because it has rubber on the inner and outer perimeters and the dust cap is threaded to create a better seal than press in metal caps.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Demco Trailer Coupler - Cast - Adjustable Channel - eZ-Latch - Black - 2-5/16" Ball - 21K
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Search Results: heat shrink connectors
- Search Results: 272 grease cap
- Shop: Headache Rack
- Q&A: Are Oil bath Hubs a Better Option for My 7,000 Lbs Axles Than Using Grease Hubs
- Q&A: Help Understanding and Achieving the 21K Weight Capacity of Demco Trailer Coupler # DM14040-81
- Video: In-Depth Review of the Jeep-Style LED Combination Trailer Tail Light
- Video: All You Need to Know About the Hardware Kit for Demco Adjustable Channel Mount Couplers
- Video: All About the Demco Trailer Coupler
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Video: Review of the Easy Grease Trailer Hub and Drum Assembly for 5.2K
- Video: Comprehensive Review: Fusion LED Trailer Tail Light
- Video: Let’s Check Out the Easy Grease Trailer Hub and Drum Assembly for 5.2K
- Q&A: Could Zerk Fitting be Added to Trailer Spindle to Make it an EZ Lube Spindle
- Shop: Trailer Hub and Drum Assembly - 5,200-lb to 7,000 lb Axles - 12" - 8 on 6-1/2 - Galvanized
- Shop: Hardware Kit for Demco Adjustable Channel Mount Couplers
- Shop: Easy Grease Trailer Hub and Drum for 5.2K to 7K Axles - 12" - 8 on 6-1/2 - Galvanized
- Shop: Fusion LED Combination Tail Light Bar for Trailers Over 80" Wide - Submersible - Red/Clear Lens
- Shop: Jeep-Style LED Combination Trailer Tail Light - 4 Function - 52 Diodes - Passenger Side
- Search Results: 205/75/14 load range e
- Q&A: Recommended Replacement Radial Tires For Trailer With 195/R14 Tires Installed
- Q&A: Hub Recommendation to Convert Dexter 7k Axle to Oil Bath
- Q&A: What's Difference Between Trailer Hubs # 8-219-9UC3 and # 8-219-9UC3A
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Q&A: What Is The Difference Between the 6K and 7K Dexter Axle Electric Brake Assemblies
- Article: Holiday 2025 | Staff Picks for Real-Life Adventures
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Wiring Diagrams
on Trailer Hubs and Drums
