What Spindle Does Trailer Hub # AKIHUB-545-2-LF-2K Fit
Updated 04/29/2020 | Published 04/28/2020
Products Featured in This Question
Question:
Good afternoon, I just purchased a set of AKIHUB-545-2-LF-2K hubs for my 4x8 utility trailer 1999 Zieman, but the spindles on my axle is too short. They are approximately 4 1/4 long from the rear flange. I would like to keep the hubs that I purchased from you, but are now in need of an axle. Could you please recommend an axle that will work with the AKIHUB-545-2-LF-2K hubs? I would prefer a square tube axle, but round is fine too. Thanks!
asked by: Tyler H
Expert Reply:
The hubs you have part # AKIHUB-545-2-LF-2K need to fit a BTR spindle like the # TRU44FR. Sounds like you have the STUB style of spindle which is shorter like you have found.
To pick out an axle I'd need to know the length of your current one from hub face to hub face and from spring seat center to center.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: 2005-Current Volkswagen Touareg, Audi, or Porsche Cayenne
- Shop: Brake Controller
- Search Results: griots garage
- Search Results: d washer
- Search Results: tools
- Shop: D Washer for EZ Lube Spindles
- Shop: Griot's Garage 2-Sided Interior Cleaning and Buffing Towels - 16" x 16" - Qty 3
- Shop: Griot's Garage 4-Finger Microfiber Cleaning Mittens for Vehicles and RVs - Qty 2
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Q&A: Spindle and Trailer Idler Hub For 2,000LB Trailer With 15", 5 On 4-1/2" Bolt Pattern Wheels
- Q&A: Difference Between Dexter 3,500 lb Trailer Axles, EZ Lube vs. non EZ Lube
- Q&A: Looking for 5 on 4-3/4 Inch Bolt Pattern Idler Hub Compatible with L44649 Inner and Outer Bearings
- Q&A: Does Trailer Axle # T20BTR-6048 Fit AKIHUB-545-2-LF-2K Hubs
- Q&A: Replacement Hubs For A Short Spindle On A 2006 EZ Loader Trailer
- Q&A: Length of Hub For 2k Axles
- Q&A: Replacement Bearing Kit and 5 on 4-1/2 Inch Bolt Pattern Idler Hub for 1-1/16 Inch Diameter Spindle