Does Curt Hitch C15312 fit 2007 GMC Sierra Dually with 42 inches From Outside to Outside on Frame

Question

Question:

Hello Will this fit my dually 2007 GMC..... outside frame to outside frame measures 42

asked by: Doug M

0

Expert Reply:

Yes, the Curt hitch part # C15312 that you referenced does fit your 2007 GMC Sierra Classic dually that has frame dimension of 42 inches from outside to outside on your truck frame.

expert reply by: Jameson C

0

Answer 1

It's not designed to. The Curt Trailer Hitch item #C15312 is custom fit for 2001 - 2010 Sierra and Silverado 2500 and 3500s. The width of the bolt holes is the same as the item #3371801102 as you can see from the dimensional diagrams below.…

view full answer...

Answer 2

The distance from the top of the mounting flange or bottom of the truck frame is to the top of the receiver tube on the Curt Trailer Hitch Receiver part #C15312 is 5-5/8".

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

There are actually a couple differences between the Curt EZr #C619-648 and the Double Lock #C60712. The visible one will be that the safety chains on the #C60712 are not centered like the ones on the #C619-648. The difference that is not visible is…

view full answer...

Answer 9

Hey Michael, We have some hitch options available but I'll need a bit more information on your Silverado in order to find the correct fit. The available hitches are sectioned out by model (1500, 2500, 3500), bed length, and bumper type. If you…

view full answer...

Answer 10

Hey Eric, Using only 4 of the 5 mounting holes on #DE28YR is not recommended when installing new brakes. There is a chance of failure that could cause a lot more problems, it is best to install them exactly how they should be. With that said by far…

view full answer...

Answer 11

The Curt Trailer Hitch Receiver part #C15312 is what I recommend as a replacement for the factory trailer hitch on a 2002 Chevrolet Silverado 2500HD. In regards to the bolt hole spacing, this will be a different for the Curt Trailer Hitch Receiver as…

view full answer...

Answer 12

Hey Justin, thanks for reaching out! The Curt Trailer Hitch Receiver #C15312 will fit the long bed on your 2006 Chevy Silverado 2500HD so you're good to go!

view full answer...

Does Curt Hitch C15312 fit 2007 GMC Sierra Dually with 42 inches From Outside to Outside on Frame

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching