Finding Brake Controller Install Port on 2018 Thor Vegas Motorhome to Install P2

Question

Question:

Bought a prodigy 2 and Ford harness for a Thor Vegas 2018 A-class do you all have a video showing the location of the adapter hook up

asked by: Brent C

1

Helpful Expert Reply:

While we don't have a video can I share that shows where to plug the install harness # 3034-P in on your 2018 Thor Vegas Motorhome I did attach a picture that points out where it is for you to check out to make installing your Prodigy P2 part # 90885 easier.

expert reply by: Jameson C

1

click to enlarge

Answer 1

In order to add brakes to a Mastertow 80THD you will need the following items: brake mounting flange, brake assembly, hub and drum assembly, trailer wiring, breakaway kit, and a brake controller. Brake Mounting Flange: Already Equipped Brake…

view full answer...

Answer 2

In order to use the Tekonsha Prodigy P3 Trailer Brake Controller part #90195 on a 2022 Thor Vegas 24.1 you'll need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part #3034-P. The plug location isn't the same on every…

view full answer...

Answer 3

It sounds like your 2017 F-150 has a 2" hitch. You will want the Blue Ox Hitch Receiver Immobilizer II item #BX88224. The inner measurement where the ball mount or accessory installs is what you want to go off of. The Blue Ox Hitch Receiver…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 9

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 10

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 11

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 12

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Finding Brake Controller Install Port on 2018 Thor Vegas Motorhome to Install P2

Continue Researching