Replacement Roof Vent for a 2000 Vintage Bandit Trailer with 14.25 Square Roof Vent

Updated 06/05/2012 | Published 06/01/2012

Products Featured in This Question

Replacement Operator w/ Knob and Screw for Ventline Vent with Metal Dome and Old-Style, Rounded Dome

(212)

$21.27

Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White

(388)

$62.96

Question:

I have a 2000, 20ft. Vintage Bandit trailer and wish to replace at least one roof vent but cannot determine which vent supplier was used originally. Opening seems to be standard 14.25 X 14.25. Thanks!

asked by: Tony W

Expert Reply:

With a rough in opening of 14-1/4 x 14-1/4 inches, you can use pretty much any replacement square vent assembly we offer, see link. Some are manual crank outs, some are electric. Some are construction of metal, others plastic. And there are different lid types.

Since you are replacing the whole assembly what you get as a replacement is up to you. Make sure that you measure the thickness of the roof. You may need a different ceiling garnish depending on how thick the roof is. Available garnishes will be listed as related parts on the right hand side of the vent product pages that can use them.

I also recommend the vent installation kit # 344270KITW. It comes with screws, tape, and caulk to secure the vent to the roof.

expert reply by: Michael H