Will Americana 13" Spoke Trailer Wheel Fit 4 on 3-1/8" Bolt Pattern
Updated 08/10/2021 | Published 12/05/2019
Question:
I bought an old dual axle 5 foot X 8 foot trailer that has a 13 inch wheel and a 4x3 1/8 inch bolt pattern. Can I still get these wheels?
asked by: John
Expert Reply:
I believe you are referring to the 13" Steel Spoke Trailer Wheel # AM20224 that has the 4 on 4" bolt pattern. From what you said I'm guessing that you measured inside to inside for the bolt holes because I've never heard of a 4 on 3-1/8" bolt pattern. Since you have a 4-bolt pattern you need to measure from the center of one bolt hole directly across to the center of the bolt hole across from it. This should measure 4" which would mean that you have a 4 on 4" bolt pattern.
Attached is a review video you can check out where we go over this measurement.
Product Page this Question was Asked From
Steel Spoke Trailer Wheel - 13" x 4-1/2" Rim - 4 on 4 - Galvanized
- Trailer Tires and Wheels
- Wheel Only
- 13 Inch
- 4 on 4 Inch
- Steel Wheels - Galvanized
- Americana
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 13" x 4-1/2" Rim - 4 on 4 - Black
- Video: Review of Dexstar Trailer Tires and Wheels - Wheel Only - AM20242
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 12" x 4" Rim - 4 on 4 - Black
- Shop: Loadstar ST175/80D13 Bias Trailer Tire with 13" White Wheel - 4 on 4 - Load Range C
- Shop: Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range C
- Shop: Dexstar Steel Spoke Trailer Wheel - 15" x 5" Rim - 5 on 5 - White Powder Coat
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 13" x 4-1/2" Rim - 5 on 4-1/2 - Black
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Search Results: trailer tires and wheels
- Video: All About the Loadstar ST175/80D13 Bias Trailer Tire with 13" White Wheel
- Q&A: Smaller Wheels and Tires For a 1971 Hunter Compact JR Trailer To Store Inside Garage
- Q&A: Is there a Trailer Wheel that Fits a 4 on 3 Inch Bolt Pattern
- Q&A: Proper Centering of New Trailer Wheel Whose Pilot Hole is Larger Than Original Wheels
- Q&A: Replacement 4 on 4.5 Bolt Pattern Trailer Rim and Radial Tire
- Q&A: Why Does Trailer's Wiring have Two Brown Wires
- Q&A: How Does Trailer Running Light Circuits with Yellow/Brown and Green/Brown Wires Run to New 4-Way
- Q&A: 13 inch Trailer Tire and Wheel Combos with 4 on 4 Bolt Pattern and 2.8 inch Pilot Hole
Lee
5/19/2020
I need a replacement wheel. The diameter is 6". The bolt pattern is 4 on 3 1/8". Yes I said that right. Not a 4 on 4. It goes on an older go kart. I measured center of bolt to center of opposite bolt.