Replacement Spring Bar for Older Curt TruTrack 10,000 Pound Weight Distribution System

Published 11/07/2019

Products Featured in This Question

Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW

(638)

$609.95

Replacement Trunnion Spring Bar for Curt TruTrack Weight Distribution System - 1,000 lbs TW

(37)

$77.77

Question:

lost a spring bar for the tru track 10,000 gross weight 1,000 tongue weight distribution hitch with grease zerks. no visible stamped part number on the remaining spring bar. do I need a 17537 or a 17536? my bar is 28.5inch long 1 and 1/4 inch square center of the hole is 7/8 inch from the end hole diameter 1/2

asked by: Gordon M

Expert Reply:

For your Curt TruTrack Weight Distribution System (10,000/1,000 pounds) # C17500 the correct replacement spring bar is the part # C17536. The shorter 28-1/2" bars that you currently have are no longer made. This replacement bar measures 35 inches long and is completely compatible with your existing Curt head (which we have verified with the manufacture), but you will need to replace both bars so that they have an equal length.

I have attached a short video review that you can check out as well.

expert reply by: Chris R