Determining Wheel Bearings and Bearing Buddies For Snow Bear Utility Trailer 6000

Published 10/25/2019

Question:

can you tell me what size of wheel bearings are on a snow bear utility trailer model 6000 and can you get bearing buddys for it

asked by: Marvin B

Expert Reply:

Since trailer manufacturers do not make bearing information readily available to the public you would need either the bearing numbers from the bearings themselves or measure the spindle to know which bearings would fit. If you pull the hubs off and remove the inner and outer bearing there should be a number stamped into the side. You would also want to do this with the seal.

If you don't have the bearings, you would want to measure the spindle with a pair of digital calipers like part # PTW80157. I have attached a diagram for your reference. If you can provide me with this information I am happy to assist you further.

To get bearing buddies, you would want to know the inner diameter of the hub bore and if the hub bore is threaded or not.

expert reply by: Heather A