Distance Between Mounting Holes of JR Products Locking L-Handle # 37210895

Question

Question:

Hello, Im interested in purchased this item, JR Products Locking L-Handle - Chrome Item # 37210895. Can you please tell me the distance between the mounting holes. thanks,

asked by: Lou R

0

Expert Reply:

The distance between the mounting holes of the JR Products Locking L-Handle # 37210895 is 1.75 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Hello Rodney, thanks for reaching out. The H-Channel #36281-955 is only available in an 8' section. We do not have any damaged or spare pieces laying around that we can send so if you need a total of 10' the only solution would be to get two…

view full answer...

Answer 2

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…

view full answer...

Answer 3

Thank you for including your picture. The Redline Locking "L" Style Door Handle #276 definitely looks to be a replacement but I would also check the measurements between the mounting holes on your Casita to be sure. It is difficult to…

view full answer...

Answer 4

For a general-purpose safety chain for a standard gooseneck trailer we offer #337BSC3842 from Buyers Products. This is a 42-inch chain with 3/8-inch clevis. The chain is rated for 15,000 pounds. This is sold as a single chain, not a pair. The 36-inch…

view full answer...

Answer 5

It really depends on your setup, if the safety chain loops on your tow vehicle are spaced far apart then you will need more slack to make a tight turn then if they were closer together. What I would recommend you do is connect your trailer to your…

view full answer...

Answer 6

I spoke with a representative at Winnebago and the said you might have to replace the entire assembly, but they cannot identify the model from your pictures and their information about your model year Winnebago Passage is missing that information.…

view full answer...

Answer 7

We can provide you with 3 of the Redline locking L style door handle #276, unfortunately we do not offer them with a keyed alike option. There are a wide variety of different key/lock combinations and we cannot guarantee any specific key number. We…

view full answer...

Answer 8

The difference between the Bargman 7-Way, RV-Style Connector w/ 6' Heavy Duty Insulated Cable - Trailer End #54006-057 and the 7-Way Molded Trailer End with 6' Cable - HD Blue Insulated #54006-009 is how the wires are color coded. The…

view full answer...

Answer 9

Sounds like you would want the 7-Way Molded Trailer End with 6' Cable #54006-009. This is a 6 foot plug and lead that was designed specifically for cold weather so it would work well for you. I attached a review video for you to check out as…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Distance Between Mounting Holes of JR Products Locking L-Handle # 37210895

Product Page this Question was Asked From

Continue Researching