Extension For RV Waste Valve Shorter than 10 Inches

Question

Question:

Hi. You sell a 10inch one which I like but do you have one that is shorter? 10S sticks out to far. Thanks.

asked by: David B

0

Expert Reply:

Yes, we have the part # T1021 which is 5 inches long instead of the # T1022BK which is 10.

expert reply by: Jameson C

0

James

2/22/2025

what is the price of part #T1021 5" sewer drain fitting extension

Jameson C.

2/24/2025

@James If you click the link for the # T1021 you an see the current price. I'd list it here but like with anything it's subject to change.

Answer 1

Hey Ben, For the RVS Camera #RVS87FR you technically could, but it would require modification to the camera. The camera itself runs on an internal rechargeable battery, paired with the monitor that plugs into your 12V accessory port in your vehicle.…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 4

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 5

Hey Brian! Yes, the Firestone Ride-Rite Air Helper Springs #F89VV will fit your 2025 Toyota Tundra. That is just the generic picture attached to that page, I can see how it would be confusing. These are designed to mount over the axle, and are…

view full answer...

Answer 6

It may be possible to wire switches to the slide outs on your Lance truck camper. The Lippert Slide-Out Switch #LC117460 is made specifically for the LCI brand slides, and we do not have any kind of build sheet or specs that will tell us what kind of…

view full answer...

Answer 7

Hi Vint; the Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding #SR78FR is designed to fit a 3/4" track. It measures 25' long x 7/8" wide x 3/8" tall. If your dimensions and profile match the picture below this will work…

view full answer...

Answer 8

The Camco RhinoFLEX Sewer Hose part #CAM39761 that you referenced uses standard RV sewer connections like what Valterra would have. On the RV side (the side that would attach to a Valterra fitting) there is a bayonet fitting which is an industry…

view full answer...

Answer 9

Furrion allows for up to a 15 degree slope on the Chill HE RV Air Conditioner System #FR25PR.

view full answer...

Answer 10

Thanks for the picture of the trailer wiring connector you have. Based on that you are in need of a 7-way blade extension like the part #C56080 for a 7 foot long extension or part #HM20049 for an 8 foot long extension. Or if you are looking for…

view full answer...

Answer 11

The Valterra Rubber Tank Grommet #F02-2106 can fit a variety of floor or wall thicknesses as it's designed to mount to a toilet floor flange that gets mounted to the floor under the toilet. This grommet does not fit directly to the floor or…

view full answer...

Answer 12

The 15,000 Btu Furrion Chill HE AC like the part #FR23PV does indeed have a start capacitor. In regard to the starting power needed, I reached out to Furrion, who told me the 15,000 Btu Chill AC's require 30 amps and 2,500 starting watts. So that…

view full answer...

Extension For RV Waste Valve Shorter than 10 Inches

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching