Trailer Hitch and Wiring For 2018 Toyota Tacoma To Tow Boat Trailer
Updated 09/28/2019 | Published 09/27/2019 >
Products Featured in This Question
Question:
I am looking to purchase a trailer hitch kit for my tacoma because it does not have one. Can you please let me know what part# i may need to begin to tow my boat since I cannot put a receiver on it currently based on the frame. Toyota said it must be after market. Thank you.
asked by: Robert T
Expert Reply:
I recommend Curt Trailer Hitch Receiver part # C13264 for the 2018 Toyota Tacoma because the powder coat is a little better compared to the other options with the e-coat base. The rust preventive e-coat is helpful if the hitch is exposed to salt water when you tow the boat trailer. It also is a concealed cross tube design so it will look nice on the Toyota Tacoma. The only portion that is visible of the hitch once installed is the receiver tube. I am not sure what you mean by cannot put a receiver on it because of the frame but this hitch is a custom fit design for the Tacoma. The installation does not require drilling, I have attached an installation video for your reference.
To power the lights on the trailer, I recommend Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # C56349 because it is a bit easier to install compared to the other options.
Since you are planning on towing, I recommend etrailer.com ball mount kit part # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If you are not sure how much rise or drop you will need in a ball mount to tow level, I recommend to take a look at the help article I have attached that will help you determine that.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Hitch and Wiring Harness for a 2022 Toyota Tacoma SR
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Hitch Installation Tips
- Q&A: T-bolt and Wing Knob Fit With Thule AeroBlade Channel
- Q&A: T-Bolt for Thule Roof Mounted Top Rack System
- Q&A: Thule Aero Crossbar T-slot Dimensions
- Q&A: Difference Between the Curt and etrailer Trailer Hitch for a 2022 Toyota Tacoma
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Replacement For Grease Seal 32374 For Trailer
- Q&A: How Long Does It Take to Install B&W Turnoverball Underbed Gooseneck Trailer Hitch BWGNRK1020
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Article: Can You Flat Tow a Subaru Crosstrek?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)



