No Power To Traffic Cameras On Furrion Vision S Wireless RV Backup Camera System

Updated 09/24/2019 | Published 09/22/2019

Products Featured in This Question

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen

(731)

$548.78

LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2

(69)

$365.27

Question:

Purchased Furrion Rear observation camera 7 screen along with side cameras. The rear camera works fine but side lights and camera will not operate on front marker lights. Original marker lights were LED but camera uses a bulb and thinking that is where the problem is.

asked by: Joe K

Expert Reply:

There are three connections that need to be made when installing the Marker Light RV Side Cameras part # FCE48TASL along with the Furrion Vision S Wireless RV Backup Camera System part # FOS05TASF. There is a brown wire that goes to the running light circuit, a red wire that goes to the camera, and a black wire for the ground.

I would first try a different ground for the light/camera to see if that fixes your issue. If not then you will need to test for power on the brown wire when you have the vehicles running light circuit activated. If this wire does not have power then you need to first check the trailer running light fuse on the tow vehicle but if all is good here start tracing the wire to look for frays or breaks.

I do not believe the incandescent vs LED is what is causing your issue.

expert reply by: Conner L