Can Two E-Bikes Be Used On the Rear Bumper for a Rockwood Mini Lite

Question

Question:

We want to know what weight the rear bumper is rated for on our 2019 Rockwood Mini Lite 2304KS. We are interested in attaching a bike rack for our e bikes. We want to use our current bike rack. Our current bike rack uses a 2 inch square hitch receiver.

asked by: Christine L

0

Expert Reply:

If you will be carrying heavy e-bikes on your 2019 Rockwood Mini Lite 2304KS then I highly recommend a frame mounted trailer hitch, the Adjustable Width Trailer Hitch Receiver part # 13703 in particular. The rear bumper on your Rockwood Mini Lite can be used to carry other lighter items such as a spare tire but I would not use this for heavy e-bikes. That said, you would need to reach out to Rockwood in order to determine its weight carrying capacity. If it is rated for the weight of your e-bikes and bike rack then you can use the Curt RV Bumper 2" Trailer Hitch Receiver part # E-100.

expert reply by: Conner L

0

Answer 1

Hey Ramiro, thanks for reaching out! The 24x84 etrailer Enclosed Cargo Carrier for RV Bumper #e94VV weighs in at 128 lbs.

view full answer...

Answer 2

Kaye, the 24x84 etrailer Enclosed Cargo Carrier for RV Bumper #e94VV does not need to be taken to a shop to install. The pieces simply get put together, and then get installed around your bumper with the included brackets and hardware. If you…

view full answer...

Answer 3

We have checked with MORryde for your exact scenario and they said that you are able to use the CRE3000 MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K item #MR87ZR on a tandem axle trailer with 31 inch spacing if your…

view full answer...

Answer 4

Hey Ronald, it sounds like you are looking for something like the Roadmaster Dual Hitch Adapter part #RM83SR which can do a 4 inch drop and then has a higher hitch opening that you could use for your bike rack. What tow bar are you using?

view full answer...

Answer 5

Hi Erik, That’s a really good question, and you’re right to be cautious here. Even though the Curt RV bumper hitch part #C19101 is rated for up to 350 pounds of tongue weight, that rating is for the hitch itself, not the RV’s bumper. Most factory RV…

view full answer...

Answer 6

Hey Mark, thanks for reaching out. Yes, the ShakeStopper Heavy Duty 2" Hitch Receiver #MNT72VR can work for carrying e-bikes, but there are a few things you'll want to consider. The main limiting factor here is the capacity of your bumper.…

view full answer...

Answer 7

I am not really sure what you are trying to do but you can install a trailer hitch on the rear of a trailer. There are two different kinds of trailer hitches for trailers, frame mount and bumper mount. The frame mount hitches are much stronger but…

view full answer...

Answer 8

Hey Richard, welcome back. I don't have specific measurements like that but looking at the pictures of a Wolf Creek 910 camper with a Fox landing step installed, I'm thinking the 36" item #TLE1536 is going to be the minimum extension…

view full answer...

Answer 9

Hey John. The 2016 E-450 is a completely different chassis than the F-450 so the Curt Hitch item #C15845 will not fit. I'll get that question fixed because it is confusing. To add rear hitch to your 2016 E-450 cab and chassis you'll need to…

view full answer...

Can Two E-Bikes Be Used On the Rear Bumper for a Rockwood Mini Lite

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching