LED Taillight Recommendation for 2004 Chevy Silverado Flat Bed Conversion

Updated 08/13/2019 | Published 08/11/2019

Products Featured in This Question

Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens

(533)

$49.44

Stainless Steel Trim Ring for Optronics STL68RB Trailer Tail Light

(24)

$18.00

Load Resistor Kit for LED Turn Signals - 50 Watts - 6 Ohm - Qty 2

(39)

$10.49

Question:

Im looking to change my box on my truck to a wooden flat bed project. my truck is a 2004 chevy 2500hd. Id like to find something easy to install preferably an led system that is a plug and go harness so i dont have to mess around with rewiring what products do you guys have for this ideal size would be about 4x8 or 4x10inch for the lights as theyll be mounted through a 2x6 board

asked by: Stephen P

Expert Reply:

I have a solution for you, but since you're switching from incandescent to LED lights and taking into consideration the size of light you're going to need, I won't be able to recommend a 4 function light that covers all of those criteria; we also don't carry actual vehicle specific replacement lights, only the bulbs. When all is said and done, because of the issues that can occur when switching from incandescent to LED lights, you're likely going to require some wiring work.

With that being said, I recommend going with the Fusion LED Trailer Tail Lights # STL68RB . These are 4 function lights that will give you Turn Signals, Brake Lights, Backup and Tail light functions in a 10" x 3" LED light. You can add # A68SSB to give you a nice, finished stainless steel trim look as well. Since you're converting from incandescent lights to LED, you may experience some hyper flashing or voltage bleeding. If that occurs, you'll need to install a load resistor similar to # DI34ZR so that your lights function properly.

expert reply by: Erik B