Atwood GC6AA-9E Water Heater Replacement

Question

Question:

Thanks for getting back to me. The at96117. Does no require any electrical changes It still uses the same switches that I have. Same wiring harnesses?

asked by: Bill J

1

Helpful Expert Reply:

The Atwood RV Water Heater # AT96117 that you referenced is the correct replacement for your GC6AA-9E that you mentioned. This is a 120 volt, 8,800 Btu, 6 gallon tank, gas and electric water heater like what you have.

expert reply by: Jameson C

1

Bill J.

8/5/2019

Thanks for getting back to me. The at96117. Does no require any electrical changes It still uses the same switches that I have. Same wiring harnesses?

Jameson C.

8/5/2019

Yes, the # AT96117 can use the same electrical wiring that your current water heater uses. You'll be able to wire it to the same switches you have currently as needed. I attached a review video for this water heater for more info for you to check out as well.

Answer 1

The correct replacement for an Atwood Water Heater GC6AA-9E is the Dometic RV Water Heater part #DMC74FR. This is a 6 gallon water heater that works with both gas and electric just like the one you have so it will be an exact match.

view full answer...

Answer 2

The Dometic RV Water Heater #DMC74FR uses an electric heating element to assist the flue tube to heat the water quicker. A double-panel switch #AT91230 can be purchased separately to allow you to power the electric and gas components on and off…

view full answer...

Answer 3

Your your Atwood GC6AA-9E according to Atwood measures 12-1/2" tall x 16" wide x 18" deep, has a tank capacity of 6 gallons. We currently have in similar specs, the Dometic RV Water Heater, #DMC74FR. I suggest this gas/electric 6…

view full answer...

Answer 4

The Dometic RV Water Heater part #DMC74FR will work great as a replacement for an Atwood GC6AA-9E. They are both gas and electric with a six gallon tank. It will allow you to reuse the existing door already on the trailer. The swap should be pretty…

view full answer...

Answer 5

For The Atwood Water Heater Model GC6AA-9E I do see the Replacement Control Panel #AT91367 is the correct part for your water heater. I believe you have an incompatible board but be sure this is the correct water heater model number first.

view full answer...

Answer 6

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 7

The best replacement water heater for your Atwood GC6AA-10E is the Dometic RV Water Heater #DMC74FR which needs a cutout of 12-3/4" tall x 12-3/4" wide x 19-7/8" deep to fit. Then you just need a door like the 12-3/4" #DMC58FR to…

view full answer...

Answer 8

When it comes to a replacement for your Atwood Water Heater GC6AA-9E The Dometic RV Water Heater #DMC74FR will be a replacement. This system has a 6 gallon tank and has both a automatic direct-spark gas pilot and an internal electric heating element.…

view full answer...

Answer 9

The Water Heater Door Conversion Kit item #DMC24FR (black) is designed for replacing Atwood/Dometic water heaters with a cut-out of 12-1/2"x16-1/2" so it would not completely fill in the gaps of your Atwood G6A-6E water heater. From what I…

view full answer...

Answer 10

The Model 32 part number 903211000 you mentioned references a Kwikee 32 series powered double step just like the part #LC3722616 that you referenced so this is what you'd need.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Atwood GC6AA-9E Water Heater Replacement

Featured Help Information

Miscellaneous Media

Continue Researching