Stay comfortable on the road with a 10-gallon water heater that fits your RV seamlessly. Quick heating, dual-fuel flexibility, and easy maintenance mean more time enjoying your journey and less time worrying about hot water.
Replacing a water heater can turn into a bigger project if the new unit doesn't match your existing setup. This model is built around standard RV dimensions, fitting a 12-3/4" x 12-3/4" cutout used by most RV water heaters. Youre working with the space you already have instead of modifying cabinets or exterior openings just to make it fit.
Tank water heaters dont provide endless hot water since they store a set amount and then need time to recover. This 10-gallon system provides more capacity than a 6-gallon unit, allowing for longer use before the tank is depleted. It works well for extended showers or back-to-back use, but still requires recovery time after extended demand.
Power availability changes from one campsite to the next, and this heater adapts to both. You can run propane when you're off-grid, switch to 120V electric when plugged in, or use both to speed up heating. The system uses 12V DC power for ignition and control, so it operates consistently alongside your RV's electrical system.
Once the tank is depleted, the system brings water back up to temperature before it's ready again. The 10,000 Btu burner handles that recovery cycle, reducing downtime between uses.
Over time, water heaters deal with mineral buildup and corrosion, especially in varying water conditions. The porcelain enamel tank helps protect against wear, while the accessible anode rod makes routine maintenance straightforward. Staying on top of basic upkeep helps keep the system running reliably trip after trip.
Installation isn't just about the heater itself. It's also about having the right exterior and controls to run it. This heater includes a white access door and control switch, giving you the components needed to complete the install and operate gas, electric, or both heating modes without sourcing extra parts.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the GE Profile 120 volt, 10 gallon gas or electric RV water heater. Has a 10,000 BTU per hour rating. And as you can see, this one comes with the white door. Now, this is a seamless installation. This will get you back on the road without any extra steps or modifications to make things work.
This GE Profile is designed with a standard RV water heater cutout in mind, makes the replacement of an old unit straightforward and stress-free. And if you notice, this one includes the wide access door for seamless installation and operation. And basically the way that door opens, just wanted to show you, you see these two clips here You just flip both of them up and then just twist them till they go through the slot and that'll release the door. And you can see the door is hinged, comes all the way down. Now you have access to everything you need.
And then when you're ready to close it up, just push it back up. They're spring loaded, so just pull it out, flip them down, pull this one out, flip it down, and it holds that door in place. So very easy to access and get to everything you need. Now, this gives you an ample hot water supply. Has a 10 gallon capacity.
So this water heater is gonna ensure you have plenty of hot water for showers, dish washing, and other needs during your travels. We mentioned it's a versatile dual fuel operation, so you can use LP gas and/or 120 volt AC. And the reason is flexibility is key when you're on the road because this water heater's gonna give you the option to use both gas and electric heating, either together for maximum efficiency or separately depending on your power availability. It is a versatile solution that'll adapt to any camping situation. This will give you a rapid heating performance.
We mentioned the 10,000 BTU gas input burner. This is gonna heat your water quickly, so you're gonna spend less time waiting and more time enjoying your journey. And whether it's a morning shower or cleaning up after a meal, hot water's always ready when you need it. It does use durable and safe heating element. It's an electric heating element. It's a 1,440 watt stainless steel element. So it is designed for longevity. That stainless steel heating element's gonna ensure consistent water heating in the electric mode, giving you peace of mind on every journey. Also, what's nice on this water heater, it's very simple upkeep if you keep your RV in top shape is important. And this water heater makes it easy to stay on top of your routine maintenance. Gives you a porcelain enamel tank design, so it's gonna allow for a straightforward access to your anode rod for draining and service. And of course, less time on your RV care does mean more time enjoying the open road. We mentioned the capacity on this is 10 gallons. Now, the overall dimensions and the cutout dimensions are gonna be listed on the product page of this part number. And also always remember, if you have any questions regarding this product or any of our products, please don't hesitate to contact us via phone, chat, or email. Or if you've purchased any product from us before, please send us pictures of it being used in your application 'cause we'd love to see how that product's working out for you. But that's gonna do it for a look at the GE Profile 120 volt, 10 gallon gas or electric RV water heater.
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews
Replaced the original tankless heater with this. Best upgrade we made!
Quick response from order to delivery. The water heater arrived as scheduled and was nicely packaged preventing damage during shipping and handling. This will be a nice upgrade to our 5th wheel.
Fit standards space and was easy to install. Works well most of the time. Gas burner sometimes fails to start.
Hot water the way you're used to. We switched from a tankless to this tanked water heater for consistency, comfort, and convenience. With the 12 3/4" hole size it fit perfectly in the existing cut out. The door is just slightly too small to cover all the holes from the previous tankless as seen in the photos. The 26" depth was no problem for us as we had the room after adjusting a few plumbing lines. Install was straight forward as we had an extra breaker for a future dishwasher and the LP line was long enough. When attaching plumbing do yourself a favor and skip all the Teflon tapes and go straight for the anti-vibration quick dry pipe dope. The hot side drips ever so slightly when it gets to temperature with tapes. My pressure relief valve was dripping on the first 2 heat cycles where it attached at the tank and the relief valve itself was found to drip while heating several times, both have seemed to resolve on their own with use.
Dual fuel heating takes about 30 minutes to reach temp with colder water supply.
Electric draws 11.5a / 1500w and only took about 40 minutes to recover after a 10 minute shower. We found the times to be consistent with previous tanked heaters.
For us the ability to have hot water at any pressure or flow was well worth the change.
Do you have a question about this RV Water Heater?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.