Can Jayco Camper Trailer Swap from 4 Lug Hubs to 5 on 4-1/2 inch Hubs
Updated 06/19/2019 | Published 06/18/2019
Products Featured in This Question
Question:
I have a 1995 Jayco 1006 pop up camper and would like to swap out the hubs and axleIf needed from a 4 lug hub to a 5 lug hub. There seems to be a wider variety of wheels and tires available with a 5 lug hub. I appreciate any guidance you can provide.
asked by: JASON P
Expert Reply:
Pull one of the hubs off of your trailer and measure the diameter of the spindle where the bearings ride. If the diameter for both is 1.06 inches then the correct 5 on 4-1/2 inch hub would be the part # 8-259-50.
If instead you have a spindle with a diameter of .99 inch you'd instead want the # 34822545BX.
Product Page this Question was Asked From
Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44643 / L44643
- L44649 / L44649
- Marine Grade
- For 2000 lbs Axles
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Recommended Idler Hub Kit w/a 5 on 4-1/2" Lug Nut Pattern for 2,200 lbs Axles
- Q&A: Does The Kenda Karrier KR35 ST175/80R13 Tire w/AM03 Wheel Come With A Center Cap?
- Q&A: Trailer Hitch Recommendation for 2025 Subaru Outback Wagon
- Q&A: Where Do I Plug In Curt T-Connector C56040 On A 2025 Subaru Forester Hybrid?
- Q&A: Recommended Hitch for a 2025 Subaru Forester Hybrid
- Q&A: Availability of Custom Wiring Harness for 2026 Subaru Forester
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Tire Sizing
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide