Picking Out Grease Seal for 2000 Coleman Taos Pop Up
Updated 06/05/2019 | Published 06/04/2019
Question:
Hi. Can’t find the correct grease seal for my Coleman Taos popup camper. Could you help me out with this please? Thank you.
asked by: Beth
Expert Reply:
To pick out a replacement grease seal you will need to measure the diameter of the spindle where the grease seal rides with a digital or dial caliper and then need to measure the hub bore where the current seal rides. With those two dimensions we can pick out the correct seal that you would need.
I attached a link to a page that has all of the grease seals we carry. You will need to select your inner and outer diameter from the filters on the page and the correct seals will be listed.
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.40 Inch I.D.
- 1.98 Inch O.D.
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Bearing Kit Recommendation for a Coleman Fleetwood Santa Fe 1999 8-258 Hub
- Shop: Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Video: All About the Timken Grease and Oil Seal
- Shop: Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Shop: Dexter Electric Trailer Brake Assembly - 7" - Left Hand - - 2,000-lbs to 2,200-lbs
- Shop: Replacement Race for L44643 and L44649 Bearings
- Shop: Grease Seal
- Shop: Replacement Trailer Hub Bearing - L44649
- Q&A: Replacement Bearings, Races and Seal for 1993 Coleman Destiny Pop Up Camper
- Q&A: Bearings, Races, and Grease Seal Recommendation for a 1995 Coleman Stoney Pop Up
- Q&A: Will Grease Seal 13194 Fit with Dexter Axle 8-258 Hub
- Shop: Mud Flaps
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Q&A: How Tight Should Castle Nut be on Trailer Hub
- Q&A: Replacement Regulator For 1998 Coleman Bayside Pop Up
- Article: Trailer Wiring Diagrams
- Q&A: Which Hubs Can Be Used to Replace the Hubs on a UFP H-1062-3
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Gooseneck to 5th Wheel Adapters
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)