bing tracking image
Customer Service My Orders
  1. Home
  2. Help Videos And Articles
  3. Accessories and Parts Help Hub
  4. Accessories and Parts Q&As
  5. Question 355439
Q & A Icon

Replacement Parts for Kwikee Series 28 Electric RV Steps For Complete Setup  

Updated 05/06/2019 | Published 05/03/2019



Question:

I recently purchased a used motorhome that had previously had an automatic electric step but had been bent so the previous owner took out the motor and all other components and just used the step manually after cutting off all the wires from the coach. I have since purchased a 28 single step Kwikee and all that came with it was a plug with 2 wires. I would think that it would still work but not in conjunction with the door opening. I think I need a controller as there is a lot more than 2 wires from the coach. Could you confirm that I require a controller and if so what model I would require. I appreciate any help you can give me and look forward to a speedy response.

0

Expert Reply:

For your Lippert Series 26 step, I recommend the Lippert Components Kwikee Step power switch and door kit # LC369311 and then using controller # LC379146. Then you will also add the Lippert Components Kwikee Step Replacement Light # LC379414. This will work the single step # LC3747451 which comes with gears and motor only.

If you are unsure of the current gear box and motor, then you would use the complete kit # LC379769.

expert reply by:
0
Jason S

Product Page this Question was Asked From