Recommendation for 2009 Acura MDX Trailer Wiring Harness and Brake Controller
Updated 04/30/2019 | Published 04/29/2019 >
Products Featured in This Question
Question:
2009 Acura MDX Trailer Wiring Harness Hello Ive purchased a travel trailer that uses a 7 pin connector presumably to control the trailer brakes. What wiring harness do I need to purchase in order to hook up to the trailer? Thanks
asked by: CODY P
Expert Reply:
For your 2009 Acura MDX you will start with a 4-way trailer connector if you don't already have one. I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118424 which plugs into the factory wiring harness located behind the trim panel on the driver's side. I've attached a video to assist. This harness has a slightly better reputation than the Curt # C56038 which is also a fit.
Then I recommend using the brake controller wiring kit # ETBC7 which will give you the 7-way connector as well as the wiring, connectors, and circuit breakers needed to hardwire a brake controller like # TK90160 for trailer brake function.
If you prefer a clean dash and a mobile app, then you can instead use # ETBC7L for the wiring kit and then the Curt Echo Wireless Brake Controller # C51180. This is quickly becoming the most popular brake controller.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media





Continue Researching
- Q&A: How To Wire a Truck Bed Converted to a Trailer
- Q&A: Bolt Size That Comes with Draw Tite Hitch # 75614
- Q&A: Recommended Trailer Hitch and Wiring for 2012 Acura MDX
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How to Route Trailer Wiring Permanently to the Outside of a 2013 Acura MDX
- Q&A: Hitch Option For 2012 Acura MDX With Full Size Spare Tire
- Q&A: Electrical Needed For Towing a Coleman Pop-up With 7-Way Behind a 2011 Acura MDX
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation on a Full-Size Ford Truck or SUV
- Article: Which Hitches are Made in the USA

