Parts Needed to Replace Half of Thule TracRac TracONE Ladder Rack # TH27000XT-EX  

The matching modular base to go along with part #TAPT-27001 is part #8528383001. This replaces either the passenger side front or driver's side rear base of a TracRac TracOne or T-Rac Pro2. This comes in a quantity of one so you'll…

To replace the broken tower leg on your Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XTB we have the following parts: (Part #28) Replacement Modular Upright #TA8523446002 (Part #13) Replacement Modular Base #TAPT-27008-02 (Part #7)…

I have attached a parts breakdown of the Thule TracRac TracONE Ladder Rack part #TH27000XT-EX. Can you please tell me exactly which part(s) you are referring to? If you just need a single upright post then you can use the Replacement Modular…

The Thule #8542526002 Replacement Crossbar for TracRac SR or TracOne Ladder Racks measures 69-1/2 inches in length, is 4 inches in width and is 1-1/2 inches tall, as shown in the provided photo.

The longest replacement crossbar for the Thule TracRac SR ladder rack is the 69-1/2 inch Replacement Crossbar for Thule TracRac SR or TracOne Ladder Rack #8542526002.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

Hey Dennis, so the Hellwig Contact Helper Spring part #HE89FR would not interfere with the install of an air bag kit at all.

I recommend going with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL89DQ for hauling around an in-bed camper with your 2024 Ford F-350 Super Duty. I really like this kit because it has the higher 7,500 lb rating (which you don't…