Picking Out Lippert Equa-Flex for Genesis Supreme Toy Hauler
Updated 03/13/2024 | Published 04/20/2019 >
Question:
I have Lippert 7K tandem axles on my Genesis Supreme toy hauler. The current equalizers are 5.75inch between bolts. Leafs are 1.75inch wide. The 6K Equaflex seems to be the right dimensions but is not rated for 7K. The 8K is too far between holes to match what is on the trailer now. I am open to the Dexter E-Z Flex also but run into the same concerns. Which one is suitable for my trailer?
asked by: Andy M
Helpful Expert Reply:
Your best solution will be the Equa-Flex equalizer set part # LC279688 which matches the capacity you need as that's the most important factor. To allow you to still have the correct shackle angle on your leaf springs you'll want to move your hangers to accommodate these.
Product Page this Question was Asked From
Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 3K to 6K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 5-1/2 Inch Long
- Tandem Axle
- Lippert
more information >
Continue Researching
- Search Results: dexter trailer suspension parts
- Shop: MORryde Rubber Equalizers for Triple Axle Trailers - 35" Wheelbase - 8K
- Search Results: morryde trailer suspension parts
- Search Results: lippert trailer suspension parts
- Shop: MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase - 8K
- Shop: MORryde Suspension Upgrade Kit for Triple Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Search Results: trailer breakaway kit
- Shop: MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: MORryde Suspension Upgrade Kit for Triple Axle Trailers - 3-1/8" Long Shackle Straps
- Q&A: Heavy-Duty Hardware Upgrade For Triple-Axle Equa-Flex Equalizers
- Video: Review of the Equa-Flex Cushioned Equalizers
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Video: In-Depth Review of the Trailer Hub Grease Cap with Rubber Plug, 2.72"
- Video: A Closer Look at the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Video: Hands-On with the etrailer Hub Bearing Kit
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Q&A: Recommended Suspension Upgrade for a Keystone Carbon 417
- Q&A: How to Determine the Right Replacement Equalizer for a Horse Trailer
- Video: Installing the MORryde Rubber Equalizers on a 2018 Grand Design Momentum 5W Toy Hauler
- Search Results: dx74xr
- Search Results: leaf springs
- Video: All About the 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles
- Search Results: cre2~33
- Q&A: Lift Kit for Tandem Axle Fifth Wheel Trailer When Towing with New Truck that Sits Up Taller
- Q&A: Replacement 6-Leaf, 7,000LB Double Eye Spring For a 2012 Dutchman Voltage 3950 Toy Hauler
- Q&A: How To Measure For Replacement Leaf Springs When Current Springs Are Flat
- Q&A: What Direction Should Suspension Shackles Face Up or Down
- Article: Big Truck Big RV
- Article: Trailer Lighting Requirements



Darren
3/13/2024
My Genesis Vortex already has the equa-flex system but after just two years looks worn out as well as the shackles as they are rubbing against the leaf springs. I upgraded my axels (2 of them)to 8k when trailer was new. What’s the best replacement for equa-flex?