How To Bypass the TIPM on a 2007 Dodge Ram 3500 with 5.9 Engine
Updated 04/03/2019 | Published 04/01/2019 >
Products Featured in This Question
Question:
I dont have power for trailer brakes at my 7pin connection and was wanting to bypass my tipm could you pls tell me what parts I need in order to do this, I do have a flat four and and a 7pin and brake controller installed. Thx
asked by: Stephen M
Helpful Expert Reply:
I can certainly give you everything that you need to bypass the TIPM on your 2007 Dodge Ram 3500 but if only the electric brake output pin is not working, I would first check the fuse box for a blown fuse, number 12 in particular which is a pink 30 amp fuse for the electric brake output circuit.
In regards to bypassing the TIPM, if you are wanting to do this for just the electric brake output circuit then all you would need to do is run a 10 gauge wire, part # 10-1-1 (per foot) from the back of the 7-way into the cab to the trailer brake controller with part # DW05745-5.
However, if you are wanting to bypass the entire TIPM system then you will need a new 4-way and 7-way because the ones you have are tired into the TIPM. For the 4-way, I recommend the Vehicle Wiring Harness Kit part # C59496 which splices in behind the taillights and then draws power from the battery so you don't overload the vehicle's taillights.
For the 7-way, I recommend the 7-Way RV and 4-Way Flat Adapter part # ETBC7. This will plug into the above 4-way for the signal lights and then comes with the wires and breakers that you will need to run the 12 volt power and brake output circuits.
The above components will give you everything that you need to bypass the TIPM in your Ram 3500 so you don't have to make any costly repairs to the system.
Product Page this Question was Asked From
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- Universal Fit
- 4 Flat
- Plug and Lead
- Splice-In
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Q&A: Where Do I Plug In Curt T-Connector C56040 On A 2025 Subaru Forester Hybrid?
- Q&A: Availability of Custom Wiring Harness for 2026 Subaru Forester
- Q&A: Recommended Hitch for a 2025 Subaru Forester Hybrid
- Q&A: Plug And Play Trailer Connector 4 Way Flat For 2026 Volkswagen Tiguan
- Q&A: Trailer Hitch Recommendation for 2025 Subaru Outback Wagon
- Q&A: Recommended Hitch and Trailer Wiring for a 1998 Ford E-350 Short Bus
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Hitch Installation Tips
- Article: My Trailer Hitch Doesn't Fit

