Demco Commander Tow Bar Storage Cover

Question

Question:

Does it matter which tow bar arm is left or right when hooked to the toad? And, during storage on the RV is there a cover?

asked by: Mark D

0

Expert Reply:

The arms of the Demco Commander tow bar DM9511010 connect to the towed car with the upper bar to the passenger side. This keeps the arms' release triggers protected on the inside of the arms.

The Commander's arms can be stowed to the left or to the right and as for keeping the tow bar tucked away and protected when not in use I recommend their vinyl Storage Cover # DM9523042.

expert reply by: Adam R

0

Answer 1

Hey Ron! It sounds like you need the Replacement Storage Pin for Demco and etrailer Tow Bars item #DM23VR. This works with all of the etrailer XHD Non-Binding Tow Bars like item #e94ZR. I attached a picture below where I circled the pin which item…

view full answer...

Answer 2

Hey Rick, the correct adapter to from a Blue Ox base plate like the part #BX2253 to a Demco tow bar would be the part #DM9523041 and you'd be set. Do you have the rest of your flat towing setup picked out already as well?

view full answer...

Answer 3

Hey Dale. Depending on the type of vehicle and the skill level of the installer it should take 3-6 hours to install the Demco Stay-IN-Play Duo Braking System for RVs w/ Hydraulic Brakes item #DM86VR.

view full answer...

Answer 4

Hey Vickie, the extended length of the coiled adapter that comes with the part #RM-15267 is 8 foot and the Demco part #DM9523010-54 adapter is only 7 foot long.

view full answer...

Answer 5

I've looked through the various replacement master cylinders we offer, and couldn't find anything that matches your photo. I found out that Reliable stopped manufacturing brake actuators several years ago, and replacement parts aren't…

view full answer...

Answer 6

Hey Bob! We are ahead of manufacturer fitment pretty often, and have confirmed that the Demco Tabless Base Plate Kit #DM38CV will fit the 2026 Maverick Hybrid. Our own etrailer Invisible Base Plate Kit #e96GV shares the same design so you can use…

view full answer...

Answer 7

In order to lock a Demco Tow Bar like the Demco Excali-Bar III Non-Binding Tow Bar part #DM9511013 you'll need the Demco Base Plate and Receiver Lock Kit part #DM9523068 which comes with locks to secure the tow bar to the motorhome and the tow…

view full answer...

Answer 8

Yes we actually have all the parts you are looking for. Replacement Storage Plate #DM25VR Replacement Compression Spring #DM95VR Replacement Grooved Clevis Pin #DM45VR Replacement Retaining Ring #DM65VR Replacement E-Clip #DM55VR Replacement Button…

view full answer...

Demco Commander Tow Bar Storage Cover

Product Page this Question was Asked From

Continue Researching