Will the Furrion RV Observation Camera System Work with the Aluminum Body on a 2018 Ford F-250
Updated 04/01/2019 | Published 03/29/2019
Products Featured in This Question
Question:
I know my Jayco Eagle is prewired for Furion camera systems. With our previous aluminum sided RV we had a lot of problems with interference, going down the road but not going slow in the campgrounds. Now we dont have an aluminum sided RV but we have a fully aluminum truck instead. ! Are we going to have problems with interference again? On our old rig setup we had the camera running all the time to monitor the 2nd trailer sailboat behind the 5th wheel. We like that feature best. The Ford Sync we have has the top-of-cab and tailgate backup camera links prewired but only for when transmission is in reverse. Also we have on hand our old 2013 wired 7inch TFT LCD color monitor setup for 2 camera inputs, from our old system that we liked a lot. Can the old monitor be used again? What system do you recommend for these parameters? wireless with no interference problems 2 camera views if possible but not essential old monitor still useable? cheaper than
asked by: Betsy G
Expert Reply:
I spoke to my contact at Furrion about the Furrion RV Observation Camera System w/ Monitor and Bracket part # FOS05TASF and they stated that you may have interference issues with the aluminum body on your 2018 Ford F-250. They did not report of any issues with this but it is a possibility. Unfortunately, that is just the nature of a wireless camera system. It will be the same for the Furrion RV Observation Camera System w/ Monitor and Bracket as it would with any other wireless camera system for that matter.
The above monitor will allow you to add up to three cameras. For this, we have the Furrion Vision S Side Camera w/ Marker Light Bracket part # FCE48TASL. I am not sure which monitor you have now as the 7" Furrion monitor was just released last year but if you have a Furrion monitor then it can be used with either of the above cameras.
Product Page this Question was Asked From
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen
- RV Camera System
- Backup Camera
- Observation Camera
- Anti-Glare
- Mirrored Image
- Motion Detecting
- Night Vision
- Touch Screen
- Waterproof
- Pre-Wired RVs
- Wireless
- Wide View
- Dashboard Mounting Bracket
- Suction Cup Mount
- Side Marker
- 5 Inch Display
- 3 Cameras
- Furrion
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Backup Camera for 2025 Forest River Rockwood Mini Lite 2205S
- Q&A: Can I Use The B&W Tow & Stow 2-Ball Mount BWTS20037B If My Camper's Dry Weight is 7600lbs
- Q&A: How to Power the Furrion Vision S+ Cameras to Work in Security Mode
- Q&A: Is There Furrion Vision S+ Observation System that Doesn't Have Side Cameras
- Q&A: What is Best RV Backup Camera System
- Q&A: Availability Of Replacement Camera For Furrion Vision S Camera System
- Q&A: How Do I Mount the Back Up Camera for the Furrion Vision S+?
- Article: Trailer Wiring Diagrams
- Article: Holiday 2025 | RVers’ Favorite Gear & Road Picks
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)