Lug Nuts Torque Setting on Part # 84546UC3-EZ
Updated 12/09/2011 | Published 12/08/2011
Question:
I purchased the Trailer Hub and Drum Assembly kit 84546UC3-EZ and need to know the lug nut torque requirement or do I use the manufacuters spec.
asked by: James W
0
Expert Reply:
Lug nuts used on 1/2 inch studs like those on the 84546UC3-EZ Hub and Drum Assembly should be torqued to 75-85 lb/ft.
expert reply by:
Mike L
0
Product Page this Question was Asked From
Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-13/16" (Qty 4)
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 1-13/16 Inch Long
- Redline
more information >
Continue Researching
- Q&A: Replacement Wheel Stud that is .545 Diameter and 1/2 - 20
- Q&A: Replacement Bronze Bushings for MoRryde CRE3000 Suspension System
- Q&A: Correct Replacement Wheel Mounting Bolts for a Dexter Hub and Drum Assembly for 3.5K Axles
- Q&A: Torque Specification for Lugs Nuts on 5/8-Inch Stud on Dexter Hub
- Article: Which Hitches are Made in the USA
- Q&A: Where Can I Find a Local Installer to Complete My Installation?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Can a Wheel That Uses 1/2 Inch Wheel Studs Be Used on a Trailer that Uses 7/16 Inch Studs
- Q&A: Looking For 1/2" x 20 Wheel Studs With .500" Knurl Diameter
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Lighting Requirements
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings