Installation of Trailer Hitch on 2018 Jeep Wrangler JL with Additional Bracket at Frame

Updated 02/19/2019 | Published 02/17/2019

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(330)

$117.45

Question:

Watched the video on installing the 13432 hitch, we have a 2018 wrangler JL. The outter two holes on this vehicle are already used to hold a metal bracket on. It is a standard bumper but has the back up sensor not sure if the reason for the difference. Do you know if it will slip over that bracket. I have attached a picture. Thanks

asked by: Steve M

Expert Reply:

The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #36424 has been discontinued but was a fit for the standard bumper on a 2018 Jeep Wrangler JL. It will not slip over the bracket you reference so it is not a fit for your specific vehicle due to that bracket. Instead I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13392 which doesn't have the weldnuts attached to the hitch. This will allow you to attach the hitch underneath the bracket you have and utilize the weldnuts on that bracket you have. Then you simply add the nuts to the other 2 bolts for installation. This will give you a 2 inch receiver which will also be a better option for towing or other accessories.

I've attached the installation instructions with the bracket information you have highlighted to assist.

expert reply by: Jason S