How Does Kats Circulating Tank Heater KH13150 Install
Published 01/16/2019
Products Featured in This Question
Question:
I have the tank heater for 3.0 V6 Sprinter but no instructions, the online instructions are confusing. A picture would be nice. please help.
asked by: Clare J
Expert Reply:
I really wish we had the chance to install the Kat's heater # KH13150 so we could provide an install video or pictures but the best is the following written instructions:
To install the heater you will first need to drain the cooling system. Then cut the lower radiator hose in the middle of the hose and install the 1-1/2" Lower Radiator Hose Connector for Kat's Heaters Circulating Tank Heaters part # KH28115 into the lower hose and secure with two hose clamps.
Locate heater hose along right side bank of engine. Cut 4” out of the center of hose and install the y connector with two hose clamps. Mount tank bracket to sheet metal plate along right side wheel well. Mount as low and close to frame as possible. Mount heater tank in tank bracket and secure. Attach 5/8” green stripe heater hose from lower radiator hose to lower connection on heater tank and secure with hose clamps.
Attach 5/8” green stripe heater hose from y connector to upper connection of heater tank and secure with hose clamps. Attach electrical plug to grille and fasten with wire ties. Fill system with coolant and pressure test for leaks.
Product Page this Question was Asked From
Kat's Heaters Thermostatically Controlled Circulating Tank Heater - 120V - 1,500 Watts
- Vehicle Heaters
- Circulating Heater
- External Tank
- 120 Volts
- 1500 Watts
- 26 - 40 Quart Cooling System
- Kats Heaters
more information >
Continue Researching
- Shop: Vehicle Engine Heaters
- Shop: Kat's Heaters Thermostatically Controlled Circulating Tank Heater - 120V - 1,500 Watts
- Search Results: kats heaters vehicle heaters
- Q&A: Does Kat's Heaters # KH13150 Include Installation Instructions
- Video: Complete Breakdown of the Kat's Heaters Thermostatically Controlled Circulating Tank Heater
- Q&A: How To Install the Kat's Heaters Thermostatically Controlled Tank Heater Dodge Sprinter 2500
- Shop: Bumpers
- Shop: Trailer Hitch
- Search Results: spring
- Search Results: ramp spring
- Search Results: trailer ramp springs
- Shop: Brake Controller
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Search Results: rv waste valves
- Search Results: valterra rv waste valves
- Shop: 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long
- Shop: Replacement Set Screw for etrailer Gooseneck Couplers - 3/4" Diameter - Qty 1
- Shop: Curt S-Hook with Wire Keeper for Safety Chains and Cables - 3/8" - 2,000 lbs
- Video: Review of Kats Heaters Lower Radiator Hose Connector - KH28116
- Shop: Nerf Bars - Running Boards
- Shop: Westin Platinum Series Oval Nerf Bars - 4" - Black Powder Coated Steel
- Shop: Vehicle Snow Plows
- Shop: Floor Mats
- Q&A: How Does The Kat's Heaters Thermostatically Controlled Circulating Tank Heater Position For Install?
- Video: Breaking Down the Kat's Heaters Lower Radiator Hose Heater w/ 175 F Thermostat
- Video: Let’s Check Out the Kat's Heaters Thermostatically Controlled Circulating Tank Heater
- Video: Best 2019 Cadillac XT4 Trailer Hitch Options
- Video: Complete Breakdown of the Replacement Power Cord for Kat's Heaters Frost Plug Block Heaters
- Video: Best 2017 Lincoln MKX Trailer Wiring Options
on Vehicle Heaters
