Replacement Trailer Coupler Repair Kit for Trailer Coupler
Published 01/16/2019
Products Featured in This Question
Question:
Good afternoon, Please see the attached picture of parts we will need to replace on our trailer. I know it looks like we have lost a few parts, but know you will able to replace with the proper new ones. Please let me know what it will take to resolve our problem Thanks Hope you can open the picture
asked by: Bob
Expert Reply:
It looks like you need a trailer coupler repair kit for your trailer coupler. If that is the case then I would love to help but unfortunately I cannot identify the correct replacement coupler repair kit for you based on the photo you have attached. The only way for us to get you the correct replacement coupler repair kit is if you can provide us with the part number for your trailer coupler as they are not universal. I would also like to point out that we do not carry a coupler repair kit for all trailer couplers therefore, it might just be better for you to replace the entire trailer coupler. For this, we have several options which I have attached a list of for you as well as a few options below.
A-Frame with 2" Hitch Ball - part # CA-5210-B
A-Frame with 2-5/16" Hitch Ball - part # CA-5400-B
Straight Tongue with 1-7/8" Hitch Ball - part # CT-2003-Z
Straight Tongue with 2" Hitch Ball - part # CT-3003-Z
If you can provide me with a part number for your trailer coupler then I would be glad to see if we have the correct replacement coupler repair kit for you.
Product Page this Question was Asked From
A-Frame Trailer Coupler - Yoke Latch - Black - 2" Ball - Weld On - 8,000 lbs
- A-Frame Trailer Coupler
- Standard Coupler
- 50-Degree Frame
- Weld-On
- 8000 lbs GTW
- 2 Inch Ball Coupler
- Yoke Latch
- 2-1/4 Inch Hole
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Solution for A-Frame Trailer Coupler Yoke Latch Repair Kit
- Q&A: How Wide are A-Frame Trailer Couplers CA5400 and CA5100B
- Q&A: Can Hitch Ball be Greased When Using Andersen Weight Distribution System
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What Is The Angle For The etrailer A-Frame Trailer Coupler?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Types of Trailer Hitches: How and Why to Use Each
- Q&A: Difference Between 10K Demco eZ-Latch Couplers
- Q&A: Replacement Hubs, Leaf Springs, and U-Bolts for a Calkins Trailer
- Article: Trailer Lighting Requirements
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)