Compatibility of Jeep Cherokee Wheels on 6 x 12 Dual Axle Cargo Trailer
Published 01/10/2019 >
Question:
I have a 1993 jeep cherikee 15 in. rim , 5 lug . I would like to know if this rim will fit on a 6x12 dual axle cargo trailer.
asked by: Ben
Expert Reply:
The wheels from your 1993 Jeep Cherokee with 5 on 4.5 inch bolt pattern according to my research can be used on some trailers with hubs that match as long as the off-set of the Cherokee wheel allows the clearances needed to not make contact with the trailer frame. Trailer wheels typically have a zero offset, so that allows for better clearances and tire wear. Many Jeep wheels especially Wrangler wheels with 5 on 5 inch bolt pattern are used on cargo and off-road trailer applications where the Cherokee wheels aren't as common.
I've linked the page to all of the hubs we carry with that bolt pattern. You will want to make sure if you are exchanging hubs on your dual axle trailer to ensure the bearings, races, and seal are compatible with your axle spindle.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Suspension Enhancement Recommendation for Trailer with Dexter 2,000 lb Axles
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Recommended Braking Hub w/ a 5 on 4-1/2 Lug Pattern and Brake Assemblies for a Lippert 3,500 lb Axle
- Q&A: Can I Add Electric Brakes To A 1993 EZ Loader Boat Trailer



