Distance Between Prongs of the Optronics Clearance Light part # MC53RB

Updated 01/07/2019 | Published 01/06/2019

Products Featured in This Question

Optronics Trailer Clearance and Side Marker Light - Submersible - Incandescent - Round - Red Lens

(2594)

$5.04

Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead

(717)

$5.40

Question:

I am about to sell my Floe snowmobile trailer and I want the lights to be operational when I sell it. It has 2 inch round red clearance light than are incandescent and they have the same dimensions as this light. My question is, the posts on the back of my existing lights are spaced at 1/2 inch apart, center to center. I am hoping that this is an industry standard, so I can this light in to the grommet and simply the existing plug in to the new light. My existing plugs do not have a number on the plug, but the back of the light looks the same. I just do not know what the spacing is, of the posts. I do know that my old lights says that it is a P2.

asked by: Gerald W

Expert Reply:

The Optronics clearance light part # MC53RB that you referenced does use an industry standard 2 prong adapter like the part # A46PB. The distance between the prongs is 1/2 inch like you need so this would fit and work well.

expert reply by: Jameson C