Where is the Running Light Fuse for Trailer on 2013 Ram 1500
Updated 03/20/2025 | Published 12/29/2018 >
Question:
On my 2013 Ram 1500 i can not locate the fuse for my trailer lights. My turn signs work but my running lights do not work. The small print on the manual are to small to read. Can you help, Please ?
asked by: Abel C
Expert Reply:
From what I could find, the fuse is in the underhood fuse box next to the battery. Check the yellow 20 Amp fuse in location F29. That should be for the trailer running/parking lights.
If I were you, then I would also check the Pink 30 Amp fuse in location F30. That is for the trailer connector itself, so it wouldn't hurt to make sure it is okay as well. There is also a 15 Amp Blue fuse in location F79 for your truck's clearance lights. This fuse shouldn't have any bearing on the trailer's clearance/running lights, but I've seen weirder things happen.
For future reference, the rest of the tow package fuses are listed below:
Backup Lights - 20 Amp Yellow Fuse in F28
Left Turn/Stop - 20 Amp Yellow Fuse in F53
Right Turn/Stop - 20 Amp Yellow Fuse in F81
Brake Controller - 30 Amp Pink Fuse in F11
If all of your fuses look good, then I recommend inspecting your trailer connector for signs of corrosion or wire damage. If you see any issues, you are better off just replacing the entire connector with # HM40975-11933 to make sure you eliminate any corrosion or wiring damage that could be unseen.
If everything on the truck looks good and you are still having problems with your trailer lights, let me know and we can do further troubleshooting.

Ray D.
3/19/2025
Thank you, been crawling under truck all day trying to figure out why no running lights for trailer, wife said you tube it, typed problem and this popped up, was my problem the whole time, thank you

Product Page this Question was Asked From
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- No Tow Package
- 4 Flat
- 7 Blade
- Plug and Lead
- Plug-In
- Pollak
more information >
Continue Researching
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Q&A: No Running Lights on Trailer Attached to a 2013 Dodge Ram Pickup
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Is there a Light Kit for the etrailer Hitch Cargo Carrier Cage Kit e42MV?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How To Achieve 8' Width On Mount-n-Lock GennyGo
- Q&A: Hopkins HM40975-11998 Trailer Connector - What Is The White Wire For?
- Q&A: Will Draw-Tite Hitch Fit With FVCO Sprinter Van Rear Step
- Article: My Trailer Hitch Doesn't Fit
- Q&A: 7-Way Wire Harness Needed For A 2024 Ram 5500
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Choose the Right Trailer Hitch Class
- Article: Flat Towing Package for 2006-2007 Chevrolet HHR
- Article: Brake Controller Installation: Starting from Scratch


Allan H.
6/11/2020
I have the same problem I was doing my trailer lights and 2 wires touched. Everything working other than running lights. Checked F29 AND GOOD checked F30 and it good. truck light all working one just the running light on trailer. did a test at the plug in for trailer and nothing on the running light but all else working