Wiring Guide for Optronics Stop, Tail, Turn Light RVSTB60

Updated 11/19/2018 | Published 11/18/2018

Question:

i have submiited this question to Bargman, no response yet. see attached file. thanks.

asked by: Charles C

Expert Reply:

The Optronics light you referenced in your question, part # RVSTB60 , is a 3-wire design that includes a wired ground (the white wire) rather than a mounting stud ground as found on some similar lights. The green wire is for the tail light circuit and the black wire is for the combined stop/turn circuit.

In standard 4-pole trailer-side wiring (such a connector is shown in the linked photo) this light will connect as follows:

4-pole WHITE to WHITE on the light
4-Pole BROWN to GREEN on the light
4-Pole YELLOW to BLACK on the light for LEFT Side
4-Pole GREEN to BLACK on the light for RIGHT Side

If you have a Bargman part number please feel fee to tell me that item number and I will be glad to re-confirm the wiring arrangement for that item. A trailer wiring article is linked for reference.

expert reply by: Adam R