Running Power Wire for 4-Way Trailer Wiring on a 2018 Ford Escape
Updated 11/13/2018 | Published 11/12/2018 >
Question:
Hello, I have been trying to find a better location to connect the power supply wire for Ford Escape 2018, rather than running it all through from the rear to the front battery. Is there anyone who tried to use Cigar lighter socket located in trunk see the picture? It appears there is plenty of room right behind the side panel where also the fuse seems able to reside, just not sure if this socket can deliver enough current for the C56320 wiring.
asked by: Thomas
Expert Reply:
I don't recommend connecting the power wire of the # C56320 to anywhere but the vehicle battery. Using the 12 volt outlet in the cargo area of your 2018 Ford Escape may not work properly. The converter needs to receive power from an isolated 12 volt circut and you really don't know if that circuit is isolated or not. There could very well be other components running off the same circuit.
If it's not an isolated circuit you could be blowing fuses over and over again.
I've linked a video from when we installed the # C56320 on an Escape. I've also linked an article on running the power wire to the battery which you might find helpful.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Wear Sleeve For A 3500 Pound Dexter E-Z Lube Axle On A Travel Trailer
- Q&A: Will The Curt 4-Way Vehicle Wiring Harness Fit a 2018 Ford Escape SE?
- Q&A: Trailer Wiring Harness For 2017 Ford Escape SE
- Q&A: Easiest To Install Trailer Hitch for a 2019 Ford Escape
- Q&A: Can Fogatti Tankless Water Heater Replace Girard Model
- Q&A: Air Force One Air Jumper Kit For Spartan K2 Chassis.
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Thickness of Rotor Portion of Kodiak 12-Inch Hub-and-Rotor Assembly KHR12D
- Article: Dielectric Grease Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Article: Performance Chips and Modules



