Buyers Products Stake Pocket Spare Tire Carrier Fit and Compatibility

Question

Question:

will this fit into the stake pockets on Bri Mar open trailers

asked by: George M

0

Expert Reply:

The Buyers Products Stake Pocket Spare Tire Carrier # 3375201012 fits most standard 3-1/2 in. and 3-3/4 in. stake pockets. It is compatible with 5 on 4-1/2 inch, 5 on 5 inch, 6 on 5-1/2 inch, and 8 on 6-1/2 inch bolt patterns.

expert reply by: Jason S

0

click to enlarge

Answer 1

The Dexstar Conventional Steel Wheel part #AM20766 is a 6" wide wheel which has a positive offset of .5" therefore, the backspacing is 4".

view full answer...

Answer 2

Since we don't have a way to attach a spare carrier to the rear of your slide-in camper your best option would be a hitch mounted spare carrier like part #6715 installed in the front hitch of your truck. If you can get me the year/make/model of…

view full answer...

Answer 3

The Stake Pocket Tie-Down Anchor for Flatbed Truck or Trailer #T35Z or #T355 measure 5-1/4 inches from the bottom up to the bottom of the top plate the D-ring is on. They are 3-1/2 inches wide and 2 inches deep. They are designed to fit in 2x4 stake…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Steven, since the 215/75R17.5 tire size of the #TR62ZR is 30.2 inches the spare cover I would recommend would be the Classic Accessories part #052963753875 which is black like you are wanting, fits tight, won't blow off, and is correct size…

view full answer...

Answer 6

Hi James! With your GVWR being 7,600 pounds, your loaded tongue weight should be around 760 pounds. With that said, I recommend going with the Weigh Safe True Tow Weight Distribution Hitch - 2" Shank - 6" Drop - 8.5K GTW, 850 lbs TW…

view full answer...

Answer 7

Hey Steve. The 12.5K Weigh Safe True Tow Weight Distribution Hitch item #WS94RR is going to be the best option for your Jayco trailer. You've done your homework well and with the range of 760 lbs - 1,160 lbs tongue you are not going to want to go…

view full answer...

Answer 8

Hey Jon, welcome back! I checked with Rich Solar and went through the install guide/owners manual of the Rich Solar NOVA 3K12 3000W 12V Pure Sine Wave Inverter with Built-in Transfer Switch for RVs #RS79VR that you referenced and they do not…

view full answer...

Answer 9

Hey Ray, thanks for reaching out. If you are set on placing the propane tank inside the toolbox, it can be done safely as long as the box is properly vented at the bottom. Propane is heavier than air, so if there is ever a small leak it will settle…

view full answer...

Answer 10

The Americana Modular Wheel #AM22461 shares the same dimensions as your SRW 31767A0 trailer wheel. It has the same 17.5" x 6.75" size with 8 on 6.5" bolt pattern and -0.5" offset. It also has the same 6,005lbs capacity with…

view full answer...

Answer 11

Hey, Lance. The direction the springs are in doesn't matter. They can be to the front or to the rear of the axle and will perform the same either way. What kind of trailer are you working on?

view full answer...

Answer 12

For a stake pocket that you could weld to the side of your trailer that would allow you to make your own walls for the trailer you could use the part #HW03-080. The inner dimensions of the stake pocket are 3-1/2" (w) x 1-9/16" (deep). This…

view full answer...

Buyers Products Stake Pocket Spare Tire Carrier Fit and Compatibility

Product Page this Question was Asked From

Continue Researching