Battery Charger and Solar Panel for Winch Battery on Car Hauler Trailer
Updated 11/05/2018 | Published 11/03/2018 >
Products Featured in This Question
Question:
I’m looking to run my winch and break away system off of two sepreate batteries for my car trailer. Is it possible to keep the breakaway system on the smaller battery that is already present and still use the 12v inlet from the 7 prong connector to have the truck charge both the break away system battery as well as a large marine battery for the winch while the truck is plugged in?
asked by: Nathan
Expert Reply:
You can use your truck 7-way 12V power circuit to maintain both the trailer's breakaway battery and a utility battery that operates the winch. But keep in mind that this 12V power feed is strong enough to maintain batteries but is NOT able to re-charge two depleted batteries. So you will want to use a shore-power AC charger like CTEK 7002 12-Volt Universal Battery Charger # CTEK56353 to fully charge both batteries before a trip; then the 12V feed can maintain them as you travel.
A good option is a DC to DC charger that you can keep mounted on the trailer and attach to the 12V circuit on the 7-Way. It will charge a battery faster than a solar charger can and is part # 331-BCDC1240D. It can also have a solar panel attached to it if needed which gives you a dual power setup. This charger will not only charge the battery and do it faster than solar power but can also recondition a battery allowing it to last longer.
Product Page this Question was Asked From
Bulldog Winch Trailer Winch - Synthetic Rope - Hawse Fairlead - 7,800 lbs
- Electric Winch
- Trailer Winch
- Planetary Gear
- 5.0 HP
- 6001 - 8000 lbs
- 51 - 60 lbs
- Slow - 0 to 4 fpm
- Plug-In Remote
- Synthetic Rope
- Bulldog Winch
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Go Power Eco Solar Charging System - 10 Watt Solar Panel
- Q&A: Solar Charging for my 12 Volt Winch Battery
- Shop: Go Power Solar Cable Entry Plate for MC4 Cables
- Shop: Replacement Mounting Hardware for Go Power Rigid Solar Panels
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Video: How to Choose a Trailer Brake Controller
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Search Results: trailer wiring
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Shop: Brake Controller
- Search Results: trailer jack
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Video: What to Know About the Curt TriFlex NEXT Trailer Brake Controller
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Search Results: trailer lights
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class




