Correct Wiring Kit for a 2019 Hyundai Santa Fe with the Trailer Tow Prep Package

Question:

what wiring for 4 way on a 2017 Santa Fe with tow package to tow my trailer. I already have the trailer hitch.

0

Expert Reply:

If your 2019 Hyundai Santa Fe has the tow package then you want to use the Tekonsha T-One # 118784 which has the 4-Way Flat connector that you asked about and plugs into the factory connector which is located under the vehicle, behind the rear bumper, on the driver’s side.

You said that you already have the trailer hitch for towing but you didn't mention a ball mount kit. If your trailer hitch has a 2" receiver like the Curt # C13195 which fits a 2019 Santa Fe then I recommend the Curt ball mount kit # C45036 but you will want to check out the linked ball mount article to ensure that the 2" drop is correct for your application.

For a 1-1/4" receiver you can use the Draw-Tite # 3593 with a hitch ball like part # 19256 or # 19258 but again you will want to check out the linked article.

Click to Enlarge
expert reply by:
0
Jon G

Ask The Experts a Question >>


Products Referenced in This Question






Product Page this Question was Asked From