What is the Torque Spec for a 5/16 Inch U-Bolt
Published 09/12/2018 >
Question:
what should I torque the u bolts holding slipper springs to axle. the axle is rated 2200lbs. The springs are 1 3/4inch the u bolts are 5/16inch diameter.
asked by: Mike
1
Helpful Expert Reply:
The torque spec for a 5/16" diameter u-bolt is 65 ft lbs. If you do not already have a torque wrench we have the Powerbuilt Dual Drive Torque Wrench part # ALL944001 which contains both a 3/8" and 1/2" drive.
expert reply by:
Conner L
1
Product Page this Question was Asked From
Powerbuilt Dual Drive Torque Wrench - 3/8" and 1/2" - 10 to 150 ft-lb
- Automotive Tools
- Torque Wrench
- Wrenches
- 150 ft/lbs
- 1/2 Inch Drive
- 3/8 Inch Drive
- Powerbuilt
more information >
Continue Researching
- Shop: Mounting Brackets for Trailer Fender - 8" to 12" Wheels - Pre-Galvanized Steel - Qty 2
- Q&A: What Torque Should Be Used For U-Bolt Nuts On Trailer Suspension
- Q&A: Torque Recommendation for 3/8 Inch Diameter Trailer Suspension U-Bolts
- Q&A: Correct Bearing Kit for a 7,000 lbs Dexter Axle
- Q&A: Is There A Rear Floor Mat For A 2026 Ram 2500 With Vinyl Floors?
- Q&A: Carrying Tool for Weight Distribution Hitches
- Q&A: Recommended Torque Wrench for Trailer Hitch Installation
- Q&A: Replacement Stud and Lug Nut for a 2021 Grand Design Reflection Travel Trailer w/ 6 Lug Dexter Hubs
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure for Trailer Hitch Drop
- Article: Anti-Rattle Devices
- Article: Most Popular Wheel Bearings
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Trailer Hitch Installation Tips

