Foot Plate for 5,000 Pound Round A-Frame Trailer Jack

Updated 09/10/2018 | Published 09/08/2018

Products Featured in This Question

Round A-Frame Trailer Jack - Topwind - 14-1/8" Travel - 3,000 lbs

(980)

$55.38

Removable 6" Caster for 2-1/4" Trailer Jacks - Steel Caster - 1,200 lbs

(132)

$22.03

Footplate for 2,000-lb and 5,000-lb Round, A-Frame Jacks

(88)

$8.59

Question:

I purchased a frame jack as a replacement for my trailer. The jack is rated at 5,000 lbs and is attached to the trailer with a frame mount. The model # TJA-5000-B. My question is what can I use for the bottom plate.

asked by: Joseph G

Expert Reply:

It sounds like you are looking for the footplate for your etrailer Round A-Frame Jack # TJA-5000-B. For this you will use the etrailer footplate # JF-99, which will fit the 2-inch diameter tubing on your jack. If you are interested in a caster wheel, we have the part # BD500245 which is compatible with your jack as well. Just note that the caster does have a 1,200-pound capacity so this would reduce the capacity of your jack to this number if used.

I have attached a couple short video demonstrations on these products that you can also check out.

expert reply by: Chris R