How Much Assembly is Required for the Roadmaster Tow Dolly with Electric Brakes Part # RM-2050-1

Updated 08/14/2018 | Published 08/13/2018

Question:

How much assembly required?

asked by: David

Helpful Expert Reply:

I have attached a photo that shows the majority of the parts you need to assemble when the Roadmaster Tow Dolly with Electric Brakes part # RM-2050-1 arrives. There is also an in depth step by step list on how to assembly the dolly which starts on page 3 of the attached installation manual. However, I have summarized the steps for you below.

1) Attach hub/drums to axle
2) Install fenders on support brackets
3-4) Connect wires for hub/drums
5) Attach wheels/tires
6) Install tongue
7) Insert pivot pin for tongue
8) Attach stabilizer bars
9) Connect wires for lighting harness
10) Install ramps
11-12) Adjust ramps for vehicle
13) Position deck spacer
14) Apply lube
15) Position deck on axle
16) Attach deck to axle
17) Torque fasteners
18) Install ratchets