Dexter 8,000 Pound Axle Idler Hubs with 5/8 Studs for Kodiak Disc Brake Kit K2R858DD
Published 08/07/2018
Products Featured in This Question
Question:
Can you direct me to the correct hub for this brake that is an idler hub for an 8K Dexter torsion axel? The idler will probably be built by Dexter. And I will need 5/8inch studs on an 865 pattern to fit my wheels, and the replacement rotors.
asked by: Joe
0
Expert Reply:
If your current hubs use grease and are not oil bath then you will need idler hub # 008-399-92 to go with slip-on rotor # K71-635-2. But if it is an oil bath set up you will need # 008-399-93.
In either case the hubs have the 8 on 6-1/2 bolt circle, 5/8 inch studs, are fit Dexter 8,000 pound axles.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Dexter Disc Brake Kit - 12-1/4" Rotor - 8 on 6-1/2 - E-Coat - 8,000 lbs
- Trailer Brakes
- Disc Brakes
- Standard Grade
- 8 on 6-1/2 Inch
- Rotor
- 8000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: dexter 89~3
- Shop: Replacement Caliper for Dexter Disc Brakes - Left Hand or Right Hand - E-Coat - 8,000 lbs
- Shop: Dexter Trailer Hub - Oil - 8 on 6-1/2 - E-Coat - 5/8" Bolts - 8,000 lbs
- Video: A Closer Look at the Dexter Steel Brake Line Tubing
- Shop: Replacement 13" Rotor for Dexter Disc Brakes - 8 on 6-1/2 - E-Coat - 8,000 lbs
- Shop: Dexter Semi-Metallic Disc Brake Pads - 6,000 lbs to 8,000 lbs
- Shop: DeeMaxx Trailer Idler Hub for 8,000-lb Axles - Oil - 8 on 6-1/2 - 5/8" Bolts - Galvanized
- Shop: Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens
- Shop: Dexter Trailer Hub - Grease - 8 on 6-1/2 - E-Coat - 9/16" Bolts - 8,000 lbs
- Video: All About the Replacement 13" Rotor for Dexter Disc Brakes
- Video: Feature Breakdown: Dexter Trailer Hub
- Q&A: 8k Dexter Trailer Hub with 5/8 inch Wheel Studs
- Q&A: Cross Referencing a Dexter Hub with 70-7 Stamped On It
- Search Results: trailer bearings races seals caps
- Shop: Vehicle Tow Bar Wiring
- Search Results: 5/8 lug nuts
- Search Results: dexter trailer hubs and drums
- Search Results: 3500lb trailer axle hub kit
- Search Results: trailer fender light
- Shop: Nerf Bars - Running Boards
- Q&A: Replacement Oil Cap for Dexter Hub # 21-35
- Q&A: Recommended Cover for a 7 x 14 V-Nose Enclosed Trailer
- Q&A: Recommended Replacement Handle Bushing for a RAM 8k Trailer Jack
- Q&A: Replacement Gear Kit for a 7K etrailer Square Direct Weld Jack
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Q&A: Hitch Recommendation for 2015 BMW X5 with M Package- not Performance M