Option for Securing E-Track to Floor Of Car Hauler
Updated 08/07/2018 | Published 08/06/2018
Products Featured in This Question
Question:
How do you secure the e track to floor for hauling a car
asked by: Albert L
0
Expert Reply:
I'd use 1/4 inch diameter lag bolts whose length is a bit more than the thickness of the floor. How many bolts you need would depend on what you're using the E-track for. I'd probably want a bolt fastening the track about every 12 inches or so, maybe closer together for a heavier load. Use a self tapper like # FA1131822 to attach to the steel floor supports if present.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 2' Long - Qty 1
- E Track
- E Track Rails
- Horizontal
- 5 Inch Wide
- 2000 lbs
- 2 Feet Long
- Erickson
more information >
Continue Researching
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What Screws do You Recommend to Use with the CargoSmart X-Track Cargo Organizer?
- Q&A: Recommended E-Tracks and Straps for Towing a 4,000 lbs Car
- Q&A: What Gauge Metal is the etrailer Horizontal E Track Made of?
- Q&A: Are The Trimax Hidden Padlocks Available Keyed Alike?
- Q&A: What are the Overall Measurements of 4-Slot Horizontal E-Track - Zinc Plated Steel
- Q&A: Is 3/4 Inch Plywood Floor Adequate for D-Ring Tie Down Anchors with Backing Plate for 3,000 lb Car
- Article: Rust Prevention
- Article: Trailer Tire Sizing
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Overview of Lubricating Grease