What Size Wheel Center Hole Diameter Fits the Trailer Hub Assembly, # 845475UC1-EZ
Updated 10/03/2011 | Published 09/29/2011
Question:
For the dexter 845475UC1-EZ hub, what is the center hole dimension requirement for a wheel.
asked by: David
0
Expert Reply:
The outside diameter of the Trailer Hub Assembly, # 845475UC1-EZ, where the wheel center hole would go is 2.6 inches. So the wheels would have to have a center hole (pilot hole) diameter of 2.6 or more inches.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-3/4
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Looking for Pre-Greased 3,500 Idler Hub that is Galvanized for Trailer Axle
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Article: Trailer Lighting Requirements
- Q&A: Recommended Non-Brake Replacement for Dexter 8-243 Hub/Drum
- Q&A: Replacement Titan Brake Actuator for Titan 3241639
- Q&A: Replacement Titan Surge Brake Actuator for Model 10 Part 3241639
- Q&A: Can Brakes be Removed on 3,500 lb Axle and Converted to Idler Hubs for Yard Work
- Q&A: Is Americana Trailer Wheel Lug Nut # AM26NR Solid Stainless Steel or Stainless Capped
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller Installation: Starting from Scratch