5th Wheel Trailer is Chucking with Convert-A-Ball 5th Wheel to Gooseneck Adapter
Updated 07/30/2018 | Published 07/28/2018 >
Question:
Severe chucking.. about to put on my Super Duty 250 cant get over 40 miles an hour even on a smooth Road you feel chucking.. I think I just wasted $$$
asked by: David
Expert Reply:
Chucking is felt during acceleration and deceleration so if you are feeling it while just driving along then something else is going on which may or may not be related to the Covert-A-Ball adapter # CAB-C5GX1216.
If it is the adapter then it could be that the height setting range is not enough to properly work with your truck/trailer set up causing some porpoising which would kind feel like a rocking sensation front to back. There is also a little more play between a gooseneck coupler and ball compared to a 5th wheel hitch so it could be that as well.
If the trailer is being towed nose high then there may not be enough weight on the ball. The absolute worst case scenario is that the use of the adapter put more stress on the frame where the pin box wings attach and has broken something.
There are better adapter options. What type of gooseneck hitch do you have in your Ford F-250? Is it a factory gooseneck, B&W, another brand? Is the truck a long or short bed? And finally, what is the pin box manufacturer and model number (should be on a sticker or plate on the pin box). I can determine what other options are available with this additional information.
Product Page this Question was Asked From
Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter w/ Offset - 12" to 16" Tall
- 5th Wheel Gooseneck Adapter
- Adapts Trailer
- 5th Wheel Trailer to Gooseneck Hitch
- Provides Extra Clearance
- 20000 lbs
- Bolts Over King Pin
- Shock Absorbing
- Convert-A-Ball
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Dimensions of MORryde Goosetec # MR97MV
- Q&A: What Replacement Converter Do I Need for a Series 7300 Model 7345 Converter?
- Q&A: Does Pin Box Mounting Plate Have to be Drilled to Install Convert A Ball part # CAB-C5GX1216
- Q&A: Will Shocker Hitch Gooseneck Coupler Have Same Turning Clearance as Turning Point
- Q&A: Does Gen-Y Nomad 5th Wheel To Gooseneck Pin Box Have Same Height Setting As Lippert 1621?
- Q&A: Will Gen-Y Nomad 5th Wheel To Gooseneck Adapter Work On 2022 Keystone Cougar 29RKS?
- Article: Best 5th Wheel to Gooseneck Adapters (2023)
- Q&A: Recommended 5th Wheel Rails and Brackets for a 2010 Ram 3500
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Ram Trailer Tow Prep Package


