Correct Installation of Suspension Equalizer on Boat Trailer

Updated 07/24/2018 | Published 07/21/2018

Products Featured in This Question

Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - 9/16" Center Hole

(135)

$17.75

Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole

(204)

$14.17

Question:

Hi I have a question on which way the triangular equalizes mounts, center hole on top u shape down or center hole down and u shape upward. I have mine installed from factory-Pacific Traile and shackle and eye of spring are touching frame , both side of equalizer. Thanks for your time

asked by: Jeff S

Expert Reply:

A tandem axle trailer suspension's equalizers like # TREQE1 should install with the single center hole at the top, where it attaches to the center hanger. This can be seen in the linked diagram taken from our article on double-eye trailer suspensions. This diagram also shows how the shackles should be positioned. Neither the shackle straps nor the spring eyes should be contacting the trailer frame.

If you can send us a photo or two showing your suspension we may be better able to diagnose the problem. You can reply to this email with your photos.

expert reply by: Adam R