Will the 10" Hydraulic Trailer Brakes Fit a 2004 EZ Loader Tandem Axle Boat Trailer

Updated 07/10/2018 | Published 07/06/2018

Products Featured in This Question

Hydraulic Trailer Brake - Uni-Servo - 10" - Right Hand - 3,500 lbs

(75)

$63.67

Hydraulic Trailer Brake - Uni-Servo - 10" - Left Hand - 3,500 lbs

(71)

$81.32

Brake Mounting Hardware Kit for 7" and 10" Brake Assemblies

(171)

$2.86

Question:

I have a 2004 EZ Loader tamden axle boat trailer 10inch drums will the Etrailer 10inch x 2 1/4inch fit my trailer?

asked by: KB

Expert Reply:

In order to determine if the Hydraulic Trailer Brake part # AKUBRK-35R for right hand side or part # AKUBRK-35L for left hand side will fit your 2004 EZ Loader Boat Trailer you will first want to confirm that you have hydraulic brakes which is more than likely the case. Then, you will want to know your axle capacity which can be found on the centerline of the axle. These assemblies are rated for use on axles up to 3,500 lbs. Once the axle capacity is confirmed you will then want to measure your hub/drum and count the number of bolts on your brake mounting flange. If your drums measures 10" diameter x 2-1/4" wide and you have a four bolt brake mounting flange then the above braking assemblies will work for you. I also recommend using new mounting hardware part # BIK-00 when installing them.

If you provide me with your VIN then I would also be able to confirm compatibility by reaching out to the manufacturer.

expert reply by: Conner L