Bearing Kit Recommendation for 2004 Aliner SportLiner
Updated 07/09/2018 | Published 07/05/2018
Products Featured in This Question
Question:
Hi, I have a 2004 Aliner sportliner and am looking for bearings and seals. The only bearing that I can find a number on is close to “L44543”? Do you know the correct part numbers?
asked by: Sean
0
Expert Reply:
That's not a number we are familiar with. What's the inner diameter of the bearing? If it's 1 inch most likely you have a L44643 and the 6 just happens to look like a 5. The bearing kit that uses that number is the part # DL21792 which is designed for spindle diameters that are 1 inch in diameter and have a seal that is 1.249 inch.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.00 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: Best Replacement Brakes for a 7,000 lbs Axle
- Q&A: Replacing A 125255UC Double Lip Grease Seal
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Can 12" Dexter Axle 6K Electric Trailer Brakes Be Replaced By 12" dexter Axle 7K Brakes
- Q&A: Should There Be a Washer Between Outer Bearing and Castle Nut on etrailer 2,000 lb Trailer Axle
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: Which Sway Control Hitch is Right For Your Trailer?